Car of the Week: 1937 Willys sedan


For current values, auction pricing, market trends and
on thousands of collector cars, visit


Story and photos by Brian Earnest

Earl Pamperin admits he probably didn’t fully understand what he was getting himself into when he decided to bring his rare 1937 Willys sedan back to life almost 25 years ago.

That’s probably a good thing, because he might have been scared off if he had fully grasped how challenging it would be.

“It was the first car I’ve done. It took me eight years. I guess when I look back on it, you’d rather have started with a complete Pierce or something” laughed Pamperin, a resident of Juneau, Wis.

The car was actually a bit of a barn find, at least for Pamperin, back in 1981. That was the year he got married and saw the car for the first time. “[My wife’s] late husband had bought it from the estate of a dentist,” Pamperin said. “They had bought it, used it in their wedding and kind of done an Earl Scheib kind of paint job on it, just so they could drive it. Then he died — he was killed in a car accident — and the car sat in a barn until I met her.

“She took me over to see it one day, and I thought, ‘Geez, that would be a good car to have at home.” It sat there for a good two years after we got married … but we eventually dragged it home and I started going to car shows in about ’86, looking around and seeing what guys were doing.”

What most guys were doing at the time, and had been doing for years, was turning the small and economic Willys of that time period into street machines and hot rods. Custom Willys from the era are not hard to find, but all-steel and original ’37s are another story.

Pamperin knew immediately that the couple’s ’37 was not destined for an engine transplant, tubbed rear end or flame paint job. “I wasn’t really happy with all the cars guys who were cutting them up to make into hot rods,” he said. “I thought there was too much car there to start cutting on it.”

That Willys cars from the late-1930s are rare and desirable today is an unlikely story in itself. Even with a complete redesign that year, the 1937 Willys car lineup was far from the most outwardly attractive menu on the new car scene. Still, there has been something appealing and enduring about the Willys’ more rounded lines and sloping roof lines. Street rodders have found the cars’ short wheelbase and light weight help them go fast, and in recent years, restorers have found the cars worthy candidates for extensive back-to-original resurrections.

Willys had introduced its small, simple, four-cylinder Model 77 in 1933. Production numbers during those Depression years were tiny, and less than 45,000 Model 77s were built over the span of four years before the lineup got a new look in 1937. 

That year, the Willys was given a blunt grille with a rounded nose, as well as headlamps in pods mounted atop the fenders. The new car was christened the Model 37, and more than 51,400 were built for the model year, although production figures seem to vary depending on your source.

The car’s holdover 134-cubic-inch L-head four produced a modest 48 hp and shifted through a three-speed manual transmission. The cars eventually became somewhat unlikely favorites of weekend racers, who installed overhead-valve V-8s in the original Willys chassis, while keeping the sleek, lightweight body. Eventually, the “gasser” Willys cars would become beloved icons of the street and strip, particularly the 1941 coupes.

The Model 37 ran on 100-inch wheelbases with hydraulic drum brakes at all four corners and semi-elliptical leaf springs softening the harsh ride of the front and rear solid axles.

Aside from its general shape and profile, perhaps the 1937-’38 Willys’ most identifying feature was the assemblage of narrow, chrome spears that ran horizontally backwards from the nose. The spears were bisected up the center of the hood by another lengthy chrome piece that reached from the windshield to the bottom edge of the curved bow.

“When we got the car, there was a bag full of those chrome strips in the trunk,” Pamperin said. “But they weren’t on the car. The guy who had done some bodywork on this car in the past had even filled up the holes for the strips. When I stripped the car all down, these holes were there.

“What happened at the time was that, of course, Willys was going in and out of receivership and they were having financial problems, so the factory was sending the cars out and promising the dealers they would send these chrome strips along. And, of course, that didn’t always happen.”

The arrangement did provide Pamperin with enough trim pieces to reconstruct most of his Willys grille work, although he did have to order some more stainless and get some of the pieces made. The trim bits weren’t the only things Pamperin had to tackle. The car needed new floors throughout, a new interior and plenty of elbow grease on the body.

“We tore it all down and I got a guy to start the bodywork, but he lost interest,” Pamperin said.  “He had worked on the actual body, and then sort of threw it back to me. Well, after watching him I figured I could do all the stuff he was doing. I took all the fenders and doors and I did all the bodywork on all that. Then I met a body guy and he kind of showed me how to get it to look nice …
“I couldn’t salvage anything in the interior. There had been mice in it. I think we found, like, seven nests of mice in there from the barn. So I took it to a guy in Fort Atkinson [Wis.] and he did all the new upholstery.”
And, of course, there was the requisite amount of salvage yard visits, Internet browsing and swap meet networking involved in any challenging restoration. Genuine Willys parts are not easy to come by, but Pamperin stuck with it until he found almost everything he needed.

“It was just a progression of things and finding stuff. I found a guy in Pennsylvania that had these ‘new old stock’ hubcaps. And I found a guy in San Francisco that had these beauty rings, and another guy had a steering wheel. A guy in Los Angeles, he calls himself Willys Replacement Parts — you can get a lot of stuff from him.

“I sent the bumpers out to have them re-plated. I had the frame sandblasted and painted and we started from there, building up the springs … My body man friend painted it, and I had the engine rebuilt, but I pretty much did everything else myself.”

The engine in his ’37 is not factory issued, according to Pamperin. “We don’t think it’s the original motor, because it’s got the word ‘Jeep’ on it, and they didn’t use the word ‘Jeep’ until World War II,” he said. “So we think somebody had trouble and replaced the motor at some time. I’m thinking it would have been an early ’40s. It might have happened in the late ’40s and they put a motor from the early ’40s in it.
In a nod to non-originality and better performance, Pamperin also put a non-stock carburetor and intake on the Willys, mainly so the car could keep up better on the highway.

“It ran OK up until about 40-45 [mph], but I wasn’t happy with it beyond that,” he said. “So I ran into a guy who said ‘I’ve got a carburetor that will fix that for you,’ so I got a Carter carburetor for it. The original manifold was actually cracked and I went to a junkyard and robbed an intake and exhaust from an old Jeep Wagoneer, I think it was, from the early ’50s. The Carter carburetor matched that intake, so it’s got a bigger hole in the intake. Now it does 55 easy.

“But it’s got to be a relatively smooth road,” he added with a chuckle. “With those solid axles, you hit a bump at 50, it’s rough.”

Pamperin discovered during his work on the body that the car wore tan paint when it left the factory, so that’s what it wears today. The tan interior adds to the sedan’s low-key appearance, which is OK with Pamperin. He doesn’t mind if the car doesn’t necessarily get all the attention such a rare survivor probably deserves.

“People don’t know what it is, or they walk by it because they don’t really notice it too much,” he said. “Or they ask me about the color and say, ‘Why did you paint it primer color?’”

Pamperin certainly never set out to make a museum quality showpiece out of his Willys, but the car did spend three years in the Wisconsin Automotive Museum in Hartford, Wis., after he completed its restoration. “Yeah, we were doing an addition on our house and putting all the kitchen stuff in the garage,” he said. “So that worked out pretty good!”




*Share YOUR Thoughts in the Firsatsaatleri Forums
*Get Pricing. Data. History in one place
*Sign up for your FREE email newsletter

4 thoughts on “Car of the Week: 1937 Willys sedan

  1. Robinson

    The article says “hydraulic” drum brakes… We had a 37 four door sedan and it had cable operated brakes. You might want to check that…
    It got parked during the war because all production was war effort including parts. Right after the war my parents bought a military surplus “Jeep” engine “truly complete” in a big crate and installed in it. That crate got a tin roof and was used as a dog house until the 1960’s.
    BTW, during the war they drove Model A Fords since they were so common and you could find used parts anywhere.
    Have a good day.

  2. Patrick Hemphill

    Hi, I’m also restoring a Willys 37 and am admiring how sympathetically yours has been restored. Mine was originally Gunmetal Gray with a red pinstripe along the waistline, but apparently not around the wheels. It also had beige Bedford Cord upholstery which has been replaced with an almost identical polyester substitute – perhaps mice don’t like that so much! The car is the one sold at Hershey in 2007 and I brought it back to the UK. It seems to display all the problems you had – rotten boot and front floors due to hardened rubber seals. Restoration is an expensive hobby but very satisfying… I have a question regarding the headlamps – does the chrome rim sit outside or inside the fender aperture? I’m having to fit UK 7″ lamps in mine and try to attach them to the original pods. Good luck with yours.

  3. Don Marler

    I have a 1937 go devil L-134 complete engine that my mechanic has inspected. No block or head cracks. Crankshaft turns freely. Compression in all cylinders. I would like to sell this to a Willys owner. Do you know anyone who is interested?
    Don Marler

  4. halekw


    I recognize that 4 and 1/2 years have passed, but do you still have this engine. Your engine is exactly what we are looking for. We are restoring a 1937 Willys coupe that has been in our family since brand new. Our original engine has a crack in the head and the engine in the car now is a 1943 military L134 engine (cracked head) that runs. We would like to put an original 1937 Willys L134 into our car. The car is being restored to original condition to honor our father and the Willys people who signed and made this fine old car. Looking forward to hearing from you. If you do not have the engine anymore, any advice on where to find one would be much appreciated. Here is a link to our Willys. Thank you. Ken Hale


This site uses Akismet to reduce spam. .